JLG G10-43A (0160005444 & After) Operator Manual - Manual (Page 147)

Section 7 - Lubrication and Maintenance
7-19 31200150
Transmission Oil
A. Transmission Oil Level Check
1. Apply park brake, shift transmission to "Neutral" and lower forks or attachment
to the ground.
2. Check transmission oil level with engine at idle and oil at normal operating
temperature.
3. Open the engine cover.
4. Remove the transmission dipstick (1) and check oil level. The oil level should be
within the "HOT" zone (2).
5. If oil is low, add hydraulic fluid to bring oil up to the "HOT" zone.
6. Replace transmission dipstick.
7. Close and secure the engine cover.
10
OW0970 OW1050
OY0230
HOT
COLD MIN
2
1
OY2330
1
HOT
COLD MIN
2
BEFORE S/N 0160040675 EXCLUDING 0160040468 & 0160040672
S/N 0160040675 & AFTER INCLUDING 0160040468 & 0160040672