JLG G10-43A (0160005444 & After) Operator Manual - Manual (Page 140)

Section 7 - Lubrication and Maintenance
7-12 31200150
Air Intake System
A. Air Filter Restriction Indicator Check
1. Perform “Shut-Down Procedure” on page 4-5.
2. Open the engine cover. (S/N 0160040675 & After including 0160040468 &
0160040672)
3. Locate air cleaner (1) and check restriction indicator (2). If red band is visible,
filter(s) must be replaced.
4. Remove dust from vacuator valve (3) by squeezing bottom of valve to allow
loose particles to fall out.
5. Close and secure the engine cover. (S/N 0160040675 & After including
0160040468 & 0160040672)
Note: Only remove canister cover to service the elements as restriction indicator
indicates. Excessive access to check an element can lead to premature element
failure.
10
OW0970
OW1010
OW0831
1
5
2
7 6
4
3
OY2310
1
5
2
7
6
4 3
BEFORE S/N 0160040675 EXCLUDING
0160040468 & 0160040672
S/N 0160040675 & AFTER INCLUDING
0160040468 & 0160040672