Gearbox disengagement, Gearbox disengagement -23 – JLG 1350SJP Service Manual User Manual

Page 69

SECTION 3 - CHASSIS & TURNTABLE

3121142

– JLG Lift –

3-23

NOTE:

Do not mix together oils of different brands or characteris-
tics.

NOTE:

The gearbox is supplied without oil; before putting the
gearbox into operation, it is necessary to fill it with oil.

This procedure is undertaken following the indications given
below.

Check that the gearbox axis is horizontal. Rotate the
gearbox housing until the drain plug (A) is on the bot-
tom on the vertical axis of the end cover.

Unscrew the fill and level oil plug (B).

Fill from the hole until the lubricant flows out.

Tighten the fill and level oil plug (B) and let the gearbox
run. After a few minutes, stop and check the oil level.

If necessary, refill with lubricant oil. Approximate oil
capacity = 2 liters ±10%

Gearbox Disengagement

The gearbox is supplied with mechanical disengagement.

THE DISENGAGEMENT OPTION MUST BE CONNECTED OR DISCONNECTED ONLY
WHEN THE GEARBOX IS STOPPED ON FLAT GROUND.

Table 3-3. Suggested Lubricants According SAE 80W/90 and SAE 85W/140 API GL5 Grade

Ambient temperature

Oil viscosity

-20°C / +30°C

SAE 80W/90

+10°C / +45°C

SAE 85W/140

Manufacturer

Oil Brand

SHELL

SPIRAX HD

AGIP

ROTRA MP

ARAL

GETRIEBEOL HYP

BP-MACH

HYPOGEAR EP

CASTROL

HYPOY

CHEVRON

UNIVERSAL GEAR LUBRICANT

ELF

TRANSELF B

ESSO

GEAR OIL GX PONTONIC MP

I.P.

PONTIAX HD

MOBIL

MOBILUBE HD

TOTAL

TRASMISSION TM

This manual is related to the following products:

1200SJP Service Manual