JLG 1350SJP Service Manual - Manual (Page 144)

SECTION 3 - CHASSIS & TURNTABLE
3-98 – JLG Lift – 3121142
8. Tighten the jam nut (shown below) with Loctite #271.
9. Torque the capscrews shown in step 5 to 660 foot-
pounds (896 Nm).
10. Remove shim and discard.
3.18 SWING DRIVE LUBRICATION
The Swing Gearbox is to be filled with 79 ounces (2.3 L) of API
Service Classification GL-5 Extreme Pressure Gear Lube. Fill to
cover the ring gear.
The Swing Brake is to be filled half full, 2.7 ounces (80 ml), with
DTE24 oil.
1
2
3
4 Brake Bleed Port
Brake Fill Port
Gearbox Fill Port
Gearbox Drain Port
Figure 3-52. Swing Drive Ports
Figure 3-53. Swing Drive Lubrication
1.195 IN. (30.35 mm) TOP OF HOUSING TO TOP
OF RING GEAR. TO BE FILLED TO COVER RING
GEAR.