4 to mute the audible alarm, 9 rs-232 screen, To mute the audible alarm – Eppendorf Innova 40R Shaker User Manual
Page 29: Rs-232 screen, To mute the audible alarm on p. 29), Ate (see, On p. 29)
Operation
New Brunswick Innova 40/40R Shaker
English (EN)
29
5.8.4
To mute the audible alarm
In the
SET
screen:
5.9
RS-232 screen
This
COMM
screen (communication) is used if you have connected a PC to the RS-232 port. Software such
as New Brunswick™ BioCommand
®
allows you to record and log data from your shaker. Use the RS-232
screen to:
• Select the RS-232 port
Mode
.
• Select the
Baud Rate
appropriate to your PC.
Abb. 5-6: Communication screen
Fig. 5-6:
Communication screen
1. Turn the
Control knob to highlight the
Mute
status (
On
or
Off
).
2. Press the
Control knob.
The current status of the alarm (
On
or
Off
) will
flash.
3. Turn the
Control knob to select
On
or
Off
.
4. Press the
Control knob to save your selection.
When you set
Mute
to
On
, the mute icon will
appear at the bottom of the screen. This icon will
be displayed on all screens until you turn
Mute
to
Off
.
1
FirmWare Revision (this line is for information
only).
2
In this sample screen, the Display is at Revision
C and the FirmWare Control Board at Revision
D.
m
r
i
h
c
s
d
li
B
:
7
.
b
b
A
RS232
2
1