1 changing setpoint values in the summary screen, 8 setup screen, Changing setpoint values in the summary screen – Eppendorf Innova 40R Shaker User Manual
Page 27: Setup screen, Ameters (see, Setup screen on p. 27)
Operation
New Brunswick Innova 40/40R Shaker
English (EN)
27
5.7.1
Changing setpoint values in the summary screen
Like in the
DISP
screen, you can change the setpoints in the
SUMM
screen:
5.8
Setup screen
In the
SET
(setup) screen you can set the day of the week and the time (on a 24
h clock). This screen also
allows you to lock all of your settings from further changes, and to mute or enable the audible alarm.
Abb. 5-5: Setup screen
Fig. 5-5:
Setup screen
1. Turn the
Control knob to select the desired
setpoint. For this example, we will highlight
100
to change the
RPM
setpoint.
2. Click the
Control knob in.
Setpoint value will flash.
3. Turn the
Control knob clockwise to increase the
value or turn counter-clockwise to decrease the
value. For this example we will change the
setpoint from
100
to
110
.
Click the Control knob in to save the new
setpoint value.
4. Repeat the procedure to change the other
setpoint values.
• If you turn the
Control knob but did not save the setpoint value, after a few seconds the
screen will revert to its previous settings.
m
r
i
h
c
s
d
li
B
:
4
.
b
b
A
SUMM
m
r
i
h
c
s
d
li
B
:
4
.
b
b
A
SUMM
m
r
i
h
c
s
d
li
B
:
5
.
b
b
A