Eppendorf ThermoMixer C - Manual (Page 44)

44
Technical data
Eppendorf ThermoMixer
® C
English (EN)
9.4.2 Mix
9.4.3 Time setting
9.5 Interface
Thermoblock Mixing frequency
can be set in increments of
50 rpm
SmartBlock 0.5 mL 300 rpm – 2 000 rpm
SmartBlock 1.5 mL 300 rpm – 2 000 rpm
SmartBlock 2.0 mL 300 rpm – 2 000 rpm
SmartBlock 5.0 mL 300 rpm – 1 000 rpm
SmartBlock 12 mm 300 rpm – 2 000 rpm
SmartBlock cryo 300 rpm – 2 000 rpm
SmartBlock 15 mL 300 rpm – 1 000 rpm
SmartBlock 50 mL 300 rpm – 1 000 rpm
SmartBlock plates
with deepwell plates and temperature control up to 80 °C
with deepwell plates and temperature control from 80 °C 300 rpm – 3 000 rpm
300 rpm – 2 000 rpm
300 rpm – 1000 rpm
SmartBlock PCR 96 300 rpm – 2 000 rpm
SmartBlock PCR 384 300 rpm – 3 000 rpm
Cycle time 15 s – 99:30 h, unlimited
• In the range of 15 s – 20 min adjustable in steps of 15 s
• In the range of 20 min – 1:00 h adjustable in steps of 1 min
• In the range of 1:00 h – 10:00 h adjustable in steps of 5 min
• In the range of 10:00 h – 99:30 h adjustable in steps of 30 min
USB interface For Eppendorf service only.