Eppendorf ThermoMixer C - Manual (Page 19)

Operation
Eppendorf ThermoMixer ® C
English (EN)
19
5.2 Setting the language
The device is delivered with English as the default language. To set another language,
proceed as follows:
5.3 Installing the thermoblock
1. Switch on the device with the power switch at the rear of the device.
2. To open the menu, press the menu/enter key.
3. Select the Settings menu item with the menu arrow keys.
4. To confirm your selection, press the menu/enter key.
5. Select the Language menu item with the menu arrow keys. Confirm
with the menu/enter key.
6. Select the language with the menu arrow keys and press the menu/
enter key.
A tick appears in front of the selected language.
7. To exit the menu, press the left menu arrow key several times.
WARNING! Personal injury or material damage due to chemically or
mechanically damaged thermoblocks.

Do not use thermoblocks that show signs of corrosion or mechanical damage.

Regularly check the condition of the thermoblocks.
WARNING! Contamination due to opening seals of consumables.
In the following cases, the seals of tubes can spring open. Sample material can
escape.
• high vapor pressure of the content
• improperly sealed cover
• damaged sealing lip
• improperly fastened foil

Always check that consumables have been sealed tightly before use.