Eppendorf ThermoMixer C - Manual (Page 18)

18
Operation
Eppendorf ThermoMixer
® C
English (EN)
Abb. 5-2:Display ThermoMixer C
Fig. 5-2: Display ThermoMixer C
1 Program number
2 Program name
3 Program levels (step 1 to step 4)
*: current step
4 Device status
Device is performing mixing/
temperature control.
Mixing process interrupted,
temperature control to be continued.
5 ThermoTop
ThermoTop has been attached.
To prevent the formation of condensate,
the device heats up the ThermoTop,
before the temperature of the
thermoblock is controlled.
6 Interval Mix
Interval Mix has been activated for
the current step.
7 Speaker
Speaker switched on.
Speaker switched off.
8 Key lock
Key lock activated: parameters cannot
be changed.
No key lock.
9 Time mode
Time Control Time counting begins
immediately.
Temp Control Time counting begins
when the set temperature has been
reached.
10 Mixing frequency
11 Actual temperature
When the actual temperature flashes on
the display, the device is not in
temperature control mode operation.
12 Set temperature
When the set temperature has been
reached, only one value is displayed.
13 Mixing time
1 2 3 4 5 6 7 8 9
10 11 12 13