Eppendorf ThermoMixer C - Manual (Page 21)

Operation
Eppendorf ThermoMixer ® C
English (EN)
21
5.3.1 Attaching the thermoblock
1. First only attach the rear edge of the thermoblock. The writing must face to the front.
2. Push the front edge of the thermoblock down.
• The thermoblock audibly engages.
• The display shows the name of the thermoblock.
5.3.2 Removing the thermoblock
WARNING! Risk of burns from hot surfaces.
The thermoblock and the heating/cooling plate can be very hot after heating and
cause burns.

Allow the thermoblock and heating/cooling plate to cool down completely
before removing the thermoblock.
1. To unlock the thermoblock, press the
lever at the front of the thermoblock
down.
2. Lift the front edge so that the
thermoblock is tilted backwards.
3. Remove the thermoblock upwards.
CLICK