Eppendorf ThermoMixer C - Manual (Page 15)

Safety
Eppendorf ThermoMixer ® C
English (EN)
15
3.5 Danger symbols on the device
NOTICE! Caution! Strong vibration.
When mixing at high speeds, items located near the device may be moved by the
vibrations of the work surface and, e.g., fall off the work table.

Do not place easily movable items near the device or secure them adequately.
NOTICE! Damage to the display due to mechanical pressure.

Do not apply mechanical pressure to the display.
NOTICE! Damage from overheating.

Do not install the device near to any heat sources (e.g., heating, drying
cabinet).

Do not expose the device to direct sunlight.

Ensure unobstructed air circulation. Keep free a clearance of at least 10 cm
(3.9 in) around all ventilation grilles.
NOTICE! Damage to electronic components due to condensation.
Condensate can form in the device after it has been moved from a cool
environment to a warmer environment.

After installing the device, wait at least for 3 h. Only then connect the device
to the mains.
NOTICE! Damage from the use of aggressive chemicals.

Do not use any aggressive chemicals on the device or its accessories, such as
strong and weak bases, strong acids, acetone, formaldehyde, halogenated
hydrocarbons or phenol.

If the device has been contaminated by aggressive chemicals, immediately
clean it by means of a mild cleaning agent.
Representation Meaning Location
Risk of burns from hot surfaces. Upper device side
On the thermoblock

Observe the operating manual. Rear of the device