Eppendorf ThermoMixer C - Manual (Page 35)

Operation
Eppendorf ThermoMixer ® C
English (EN)
35
5.9.6 Editing programs
There are two ways to change a saved program:
• Changing the program via the Edit menu item in the program list
• Changing the program during operation
5.9.6.1 Changing the program via the Edit menu item in the program list
1. In order to change the parameters of a program, select the program under Menu >
Programs . Confirm with the menu/enter key.
2. Use the menu arrow keys to select the Edit menu item. Confirm with the menu/enter
key.
The display shows the saved parameters.
You can change all parameters and save them (see Creating a program on p. 30).
5.9.6.2 Changing the program during operation
1. Load the program with the program keys or from the program list.
2. Change the parameters.
For programs with program levels: Use the ◄ or ► menu arrow keys to select a step,
change the parameters of the step.
3. Start the program.
After completion of the program, a message appears stating that the program has been
changed. You can confirm or discard the changes.
5.9.7 Deleting programs
Programs 1 to 5 cannot be deleted. You can change and overwrite the program name and
all parameters of these programs.
1. In order to delete a program from the program spaces 6 to 20 , select the program
under Menu > Programs . Confirm with the menu/enter key.
2. Use the menu arrow keys to select the Delete menu item. Confirm with the menu/enter
key.
The display shows the message
Confirm delete . In order to confirm, press the menu/
enter key.