Advance Adapters Orion Transfer Cace - Manual (Page 6)

SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
Remove and retain case cover C13.
Remove the cotter pin, screw plug, compression spring, and shift fork lock ball from the
HI and LOW shift fork, Items S5, S6, S7, S8. Invert the case, if need be, to have the spring
and ball fall out. These parts will not be reused since a new shift assembly has been
provided.
Remove and retain the HI and LOW shift fork shaft lock plate and bolt S2.
Using a drift punch, lightly drive out the HI and LOW shift fork shaft S1
towards the rear of the transfer case.
Remove and discard the HI and LOW shift fork S4 and shift rail S1 .
ADVANCE ADAPTERS INC. P/N: Orion
PAGE 6 OF 15
Page Rev. Date:
12-29-05