Advance Adapters Orion Transfer Cace - Manual (Page 5)

Remove and retain the front driveshaft shift assembly from your transfer case:
Vacuum- Diaphragm cylinder and transfer front drive fork
Mechanical- Transfer front drive shift shaft guide assembly (pictured)
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the
components will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion,
we strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
Remove and retain the transfer extension housing with
its internal parts, Items C28, G16, G17, G18, G20.
With a dead blow hammer, drive out
the front output shaft G18.
Remove and retain snap ring G16
from extension housing C28. Press
out ball bearing G17 and discard.
ADVANCE ADAPTERS INC. P/N: Orion
PAGE 5 OF 15
Page Rev. Date:
04-18-05