Advance Adapters 715543231 - Manual (Page 3)

ADVANCE ADAPTERS INC. P/N: 715543-231
P.O. Box 247, 4320 Aerotech Center Way New Item: (10/10)
Paso Robles, CA 93447 PAGE 3 of 8
Telephone: (800) 350-2223 Fax: (805) 238-4201 Page Rev. Date: 07-14-11
SPECIAL NOTE: The components packaged in this kit have been assembled and machined for specific type of conversions. Modifications to any of the components
will void any possible warranty or return privileges. If you do not fully understand modifications or changes that will be required to complete your conversion, we
strongly recommend that you contact our sales department for more information. This instruction sheet is only to be used for the assembly of Advance Adapter
components. We recommend that a service manual pertaining to your vehicle be obtained for specific torque values, wiring diagrams and other related equipment.
These manuals are normally available at automotive dealerships and parts stores.
TJ 231 CABLE SHIFTER
Secure the pivot pin mounts to the shifter housing using 3 of the B.H.C.S and the one S.H.C.S(see 2nd photo on row 3).
Remove the double nuts and star washer from one side of the cable and slip the heat sheild over the cable. One of these
nuts gets discarded and install one of theme back on the cable with the star washer.
Install the cable barrel retainer (make sure it is orientated correctly) and thread the cable barrel on to the cable.
Thread the heim joint to the cable end and before mounting to the shifter housing install the extra cable barrel plug.
Retain the cable assembly to the shifter housing with the 3 B.H.C.S. Line the heim joint with the handle and install the
bolt through the access hole in the shifter. We have provided plugs for these once the fasteners are tight. The shift knob
uses a flat head bolt that recesses into the shifter handle and can be installed now or during assembly into the vehicle.