beautypg.com

Caution – Snorkel TB50 User Manual

Page 68

background image

Chapter 9 – Stowing and Transporting

64

TB42/TB50 – 0074923

3. Raise the main boom about 1′ (0.3 m).

4. Place a wood block under the rotator pylon. Lower

the boom so the pylon rests on the wood block.

5. From the upper controls, turn the start switch to the

off position. If equipped, place the platform control

box cover over the upper controls.

6. From the lower controls, push the emergency stop

button inward. Turn the start switch to the off position

and remove the key.

7. Turn the battery disconnect switch off.

8. On duel fuel machines, close the shut-off valve on

the LPG tank (refer to Figure 9.5).

Figure 9.5 – LPG Tank

9. Close and latch the cowling doors.

Figure 9.6 – Platform

Steel

Aluminum

10. Use wire-ties to fasten the platform gate to the

guardrails to prevent the gate from bouncing. Also,

use wire-ties to fasten the platform foot switch to

the platform floor.

Caution

Ratchets, winches, and come-alongs may produce

enough force to damage machine components. Do

not over tighten the straps or chains when securing

the aerial platform to the transport vehicle.

11. Determine if the platform is made of steel or alu-

minum. Steel platforms have toeboards with rolled

edges an aluminum platforms have toeboards with

straight edges.

Caution

Aluminum toeboards are not strong enough to use

when securing the platform to the transport vehicle.

Damage to the platform may occur if the nylon strap

is placed over the toeboards. Thread the strap

through the platform mounting bracket or over the

mid rail when securing an aluminum platform.

12. Use a nylon strap to securely fasten the platform

against the wood block. On steel platforms, thread

the strap over the toeboard as shown in Figure 9.6.

13. On aluminum platforms, thread the strap over the

platform mounting bracket or the mid rail as shown

in Figure 9.6.

14. Use chains or straps to securely fasten the aerial

platform to the transport vehicle using the tie-down

lugs as attachment points. Proper tie-down and

hauling are the responsibility of the carrier.

Shutoff Valve

This manual is related to the following products: