Snorkel TB50 - Manual (Page 24)

Chapter 4 – Safety Devices
20 TB42/TB50 – 0074923
Horn
An optional horn may be used to warn personnel on
the ground. The horn button is on the right side of the
upper control box.
The horn is operational when the emergency stop but-
ton and the start switches are both on, at the lower and
the upper controls.
All Motion Alarm
An optional all motion alarm may be provided on the
machine. The alarm sounds, in short beeps, anytime the
machine functions are being operated. The alarm is used
to warn personnel in the work area to stand clear.
Flashing Light
An optional amber flashing light may be located on
the top of the boom near the base end (refer to Figure
4.8). The flashing light warns personnel that the aerial
platform is in the area.
Figure 4.8 – Flashing Light
The light flashes at about one flash per second when
the engine is running.
Driving Lights
The optional headlights and blinking tail lights may be
used to help improve visibility while driving the aerial
platform and help others see it too.
The headlights are located on the top of the front
cowling.
The tail lights are mounted on the sides of the rear
cowling.
Do not use the driving lights to drive on public
roadways.
Platform Work Lights
The optional platform work lights may be used to help
improve visibility while working aloft in dimly lit areas.
The platform work lights are located on the top rail of
the platform, one on each side of the upper control
panel (refer to Figure 4.9).
Do not use the platform work lights to drive on public
roadways.
Figure 4.9 – Platform Work Lights





Flashing Light
Light Switch