Snorkel TB50 - Manual (Page 53)

Chapter 7 – Prestart Inspection
TB42/TB50 – 0074923 49
Prestart Inspection Checklist
Item Inspect For OK
Operator’s Manual In place, all pages readable and intact
Engine
Oil Level Between full and add marks
Coolant Liquid cooled engines – proper fluid level
Air cooled engines – air intake and fan free of
obstructions, belt in good condition
Radiator Cap tight, good condition and clean
Fuel tank and line Tank full, cap in place and tight/no leaks
Air filter Clear indicator
Charging system Proper operation
Cold weather start kit No damage or deformation
Electrical System
Battery Condition and charged for proper operation
Battery fluid level and terminals Proper level/clean, connectors tight
Cables and wiring harness No wear or physical damage
Hydraulic System
Fluid level Between add and full marks, cap in place and tight
Fluid filter Verify operation in the green zone
Hoses, tubes and fittings No leaks
Cold weather warm-up kit Proper operation
Tires and wheels Good condition
Lower Control Station
Operating controls Proper operation
Emergency stop and emergency power Shuts off lower controls/proper operation
Emergency Lowering Proper operation
Level Sensor Sounds tilt alarm
Flashing Lights Proper operation
Structures
Weldments – Chassis, turntable, booms, platform, etc. Welds intact, no damage or deformation
Slide pads In place, no damage or deformation
Fasteners In place, tight, and no damage
Wire ropes No deformation or broken strands
Upper Control Station
Guardrail system and lanyard anchors Welds intact, no damage or deformation
Operating controls – Boom functions, drive, brakes, etc. Proper operation
Emergency stop and emergency power Shuts off upper controls/proper operation
Horn Sounds when activated
Electrical power outlet – GFCI Proper operation
Driving and work lights Proper operation
Platform control cover In place and proper operation
All Motion Alarm Sounds when machine is operated and/or driven
Sandblast Protection Kit In place and proper operation
Air Line to Platform No damage or deformation, caps in place
Driving and Platform Work Lights No damage or deformation, proper operation
Tow Kit In place, no damage or deformation
Platform Glazier Package Good condition
Platform Welder Good condition, proper operation
Placards and Decals In place and readable