Snorkel S3010E User Manual
Page 48
Chapter 12 – Troubleshooting
44
S3010E - 514226-000-ANSI
Symptom
Possible Cause
Corrective Action
Only slow drive speed works.
Platform elevated above 6 to 7 feet
(1.8 to 2.1 m).
Normal operation, lower platform to drive
machine at faster speed.
Machine will not steer.
Joystick interlock switch not en-
gaged.
Engage the interlock switch before operat-
ing the steer switch.
Tilt alarm does not work.
Platform is not raised more than
6′ (1.8 m).
Normal operation. The tilt alarm is not
active until the platform is raised more
than 6′ (1.8 m).
Battery charger does not indi-
cate a reading when charging
batteries.
No source of power.
Make sure power source is plugged in
and turned on.
Faulty batteries or charger.
Stow the machine and do not operate until
repairs are made.
Hydraulic fluid temperature of
160°F (71°C) or more.
Prolonged platform operation.
Stop operation until fluid cools.
High pressure fluid return to reservoir
caused by kinked or twisted hose.
Remove the kink or twist from the hose.
Let fluid cool before resuming operation.
Hydraulic system component failure.
Stow the machine and do not operate until
repairs are made.
Severe hydraulic leak.
Failure of hose, tube, fitting, seal, etc.
Stow the machine and do not operate until
repairs are made.