Caution – Snorkel S3010E User Manual

Page 32

Chapter 8 – Prestart Inspection

S3010E - 514226-000-ANSI

With the machine set up to operate from the upper con-

trols, check to see that the battery condition indicator

gauge displays a power reading.Battery level is measured

in percentage.

Placards and Decals

To inspect the placards and decals:

1. Inspect all safety and operational placards and de-

cals. Make certain they are in place, in good condi-

tion, and are legible.

2. Clean the placards and decals with soap and water,

and a soft cloth if the words or pictures cannot be

seen.

Caution

Solvents may contain hazardous ingredients. Follow

the manufacturer’s label for proper use and disposal.

Wear protective gloves and splash-proof safety

glasses when using solvents.

3. Remove wet paint overspray with a natural biode-

gradable solvent and a soft cloth.

4. Replace any missing, damaged, or illegible placards

or decals before operating the aerial platform.

Placard and decal kits are available from Snorkel.

All placards and decals are illustrated on the following

pages.