Snorkel XT24AL-sn10000+ - Manual (Page 23)

1/31/2008 - 24 -
2. The slope the machine is on is over five degrees,
3. Either of the two emergency stop buttons is pushed
(one of the emergency stop buttons is on the platform).
4. Failed or out of adjustment of outrigger switches.
5. The ground is soft and the machine settles as the outriggers are
extending.
6. The ground is too rough or un-level such that the legs (or leg) have
reached the extent of their travel. If this condition occurs the operator
rectify the condition before trying again. The machine will not level
of more than five degrees.
7. Failed or out of adjustment of scissors stack position switch.
8. If the machine is mal-functioning. The machine should not
be used until the malfunction is remedied.