Snorkel XT24AL-sn10000+ - Manual (Page 19)

1/31/2008 - 20 -
1. The top control button is the emergency stop. To operate the
machine this button must be out.
2. The next control is a red alarm light. This light is active at the
same time as the alarm horn, which is located inside the main box.
3. The next two switches are the up-down and the push-to-enable
buttons. The push-to-enable button must be pushed to enable the
up-down button. These buttons control the raise/lower functions
of the platform.
4. Climb onto the platform in the back of the lift
5. Close the gate or latch the chain
6. From the platform push the “push-to-enable button”, simultaneously
twist the raise/lower platform button.