Snorkel SPM20 CE-sn0001+ - Manual (Page 57)

54
Platform Data
SPECIFICATION SPM20
Occupants: (Persons allowed in Platform) 1 1-2
Maximum Work Load Standard: 150 125kg 200 150kg
(Capacity): Extendible 150kg 200kg
Platform Height – Mast Fully Extended
– (Ground to Platform Floor):
6 m 7.5 m 7.5 m 9m
Platform Cycle Performance: Lift Up: 27-36 sec. 39-48 sec. 62-73 sec. 82-93 sec.
(in seconds, rated load ) Lift Down: 30-35 sec. 40-45 sec. 43-46 sec. 53-56 sec.
Machine Component Weights
SPECIFICATION SPM20
Platform : Standard Platform: 32kg
(Quick-Change Platforms)
Battery: (per battery)
20kg
Serial Number Locations
For machine identification, a serial number plate is affixed to the machine. The plate is
located on the back of the mast, just above the mast support bracket.
5.3 OPERATOR MAINTENANCE
Lubrication
Hydraulic Oil (HO)
HYDRAULIC SYSTEM
OPERATING TEMPERATURE RANGE
SAE VISCOSITY GRADE
+0 ° F to +180° F (-18° C -83°C ) 10W
+0 ° F to +210° F (-18° C -99°C ) 10W-20, 10W-30
+0 ° F to +210° F (-18°C - 99°C ) 20W-20
Hydraulic oils must have anti-wear qualities, and sufficient chemical stability for mobile
hydraulic system service. The manufacturer recommends Mobil fluid 424 hydraulic oil, which
has an SAE viscosity of 10W-30 and a viscosity index of 152.
For cold weather applications, i.e. When temperatures remain consistently below +20 ° F (-
7 c ) T he manufacturer recommends using Mobil DTE 13 hydraulic oil.
Aside from The manufacturer’s recommendations, it is not advisable to mix oils of different
brands or types, as they may not contain the same required additives or be of comparable
viscosities. If use of hydraulic oil other than Mobil fluid 424 is desired, contact the
manufacturer for proper recommendations.