Snorkel SPM20 CE-sn0001+ - Manual (Page 38)

35
Tilt Sensor •
Program •
Tilt Sensor •
Allows viewing current tilt sensor individual X and Y direction degree reading.
Program
•
Allows programming of the items shown in Table 3-4, the following is a brief explanation of
each programming item.
NOTE: There are two production modules available at this time, one for North/South
American and European languages, and one for Asian languages. All programmable
items between these modules are identical with the exception of language selection.
Back To Main • – When selected, will return to main level menu.
Set Language • – Selects the language that text on the LCD screen will be displayed.
Set Sleep Time- • Allows setting the length of time the machine will remain powered up
without control input before powering itself down.
Set Polarity of Keypad Code
• – Turns on or off the Programmable Security Lock switch
circuit, if equipped.
Enable Detection of Horn Open Circuit
• – Enables horn electrical circuit to be turned on
(YES) or off (NO) if machine is equipped with a horn.
Enable Detection of Beacon Open Circuit
• – Enables mast/base beacon strobe electrical
circuits to be turned on (YES) or off (NO) if machine is equipped with either or both
beacon strobes.
Forward Alarm Disable
• – When turned on (YES) will disable the alarm when driving
forward.
Table 3-4. SPM20 Ground Control Station – Level 3 – Programmable Settings and
Factory Presets.
Level-3: Operator Programmable Settings On LCD Display: YES=√ HIGH=↑
NO=× LOW=↓
LEVEL PROGRAMMABLE ITEM
FACTORY
PRESET
SETTING RANGE
3 Back to Main — Return to Main Menu
3 Set Language
NOTE: There are two production
modules available at this time, one for
North/South American and European
Languages, and one for Asian
Languages.
1 1- English 6 - Italian
2- German 7- Swedish
3- Dutch
8- Brazilian Portuguese
4- French 9- Finnish
5- Spanish
2 1- English
2-Chinese
3- Japanese
3 Set Sleep Time 5 MINS 0-60 MINS
3 Set Polarity of the Keypad Code LOW HIGH/LOW
3 Enable Detection of Horn Open Circuit NO (a) YES/NO
3 Enable Detection of Beacon Open
Circuit
NO (a) YES/NO
3 Forward Alarm Disable NO YES/NO
3 OSS Diagnostics NO YES/NO
Notes: (a) SPM20 Models this feature is standard equipment and preset to YES at factory.