beautypg.com

Synergy 8200 - Jeep XJ 4-Link Long Travel System User Manual

Page 14

background image

17) The PPM-8233-03 track bar can now be fully installed.


18) Last of the kit to install is the PPM-8233-02 track bar brace. Install using the 4 ½” x 1.5” long bolts and

top lock nuts provided in the kit. Install all hardware loosely until all bolts have been started. The brace
attaches to the track bar bracket as pictured below. Use a washer under both the bolt heads and under
the top lock nuts.

The other end of the trackbar brace attaches to the opposite side of the chassis using the two existing holes in

the chassis and attaches uses the same hardware as shown below.