Synergy 4024 - Jeep JK Air Tank Mount - Manual

SYNERGY MFG. 870 INDUSTRIAL WAY, SAN LUIS OBISPO, CA (805) 242-0397
PPM-4024 - 2 Gallon Air Tank Mount Kit
Kit Contents:
• (2) Tank Mount Brackets
• (4) U-Bolts
• (8) .25” Nuts
Advisory: There are two metal tubes located directly above the round Cross Member where the brackets attach.
DO NOT attach the U-Bolts over the small metal tubes. The U-Bolts must run between the steel tubes and the
round cross member.
1. Underneath the Jeep, place the U-Bolts between the wire bundle and steel tube as indicated in the following
picture:
2. Place the tank mount bracket into position and firmly hand tighten all four nuts on the passenger side.