Apple IP (AppleShare IP) Gateway - Manual (Page 63)

restrictions for all LocalTalk networks in that set of numbers. You can also pick
range numbers that cover only a part of a network.
8 Click Add.
The network number appears in the Network List at the top of the dialog box.
9 Repeat steps 7 and 8 until you have listed all networks you want to include or exclude.
10 Click OK.
The dialog box closes. When you restart the gateway, your restrictions will be
in effect.
Changing network access restrictions
You can add or remove restricted networks at any time, using a variation on
the procedure described in the previous section, “Limiting Network Access.”
1 Open the Gateway Manager program.
2 Stop the gateway if it is running.
You cannot make changes to gateway setup while the gateway is running.
3 Choose “Set up Gateway” from the Control Menu.
4 Click the “Use network restrictions” checkbox to select it, and then click Set Up.
5 If you want to add networks to the Network List, enter their numbers in the Network
Range text boxes at the bottom of the dialog box.
Establishing gateway security 55