Apple IP (AppleShare IP) Gateway - Manual (Page 43)

3 Click the radio button that represents your addressing choice.
You can configure for automatic addressing, manual addressing, or both.
4 Specify the number of addresses.
m If you are configuring for automatic addressing only, enter a value from 1 to
253 in the upper “Number of addresses” text box.
m If you are configuring for manual addressing only, enter a value from 1 to
253 in the lower “Number of addresses” text box.
m If you are configuring for both automatic and manual addressing, enter a
value from 1 to 253 in each of the “Number of addresses” text boxes.
5 Enter the first address.
m If you are configuring for automatic addressing only, enter the first address
in the upper “Start of IP range” text box.
m If you are configuring for manual addressing only, enter the first address in
the lower “Start of IP range” text box.
m If you are configuring for both automatic and manual addressing, enter a
first address in each of the “Start of IP range” text boxes.
Setting up the gateway 35