Apple IP (AppleShare IP) Gateway - Manual (Page 47)

3 Click the AppleTalk connection icon in the upper-left corner to select it (if it isn’t selected
already).
This icon indicates the connection method that your computer is currently
using. The connection method is set in the Network control panel, shown in
the following figure, and the MacTCP setting is determined by that setting.
Note: If your computer has only one connection method, you may not have a
Network control panel. In this case, only one icon appears in the MacTCP
control panel window.
When the icon is selected, a pop-up menu of zones appears beneath it. (On
some LocalTalk networks there are no zones and no menu. If this is the case,
you can skip step 4.)
IMPORTANT Remote Access clients need to be connected to the Apple Remote
Access server for the zone menu to appear.
4 Choose the zone containing the Apple IP Gateway from the pop-up menu, as shown on
the following page.
Getting users ready 39