Apple IP (AppleShare IP) Gateway - Manual (Page 49)

6 Click Server in the upper-left section of the dialog box.
You do not need to enter a gateway address or any address class or subnet
information.
7 If necessary, enter the domain name server information in the lower-right section of the
dialog box.
If you do not enter information, the gateway computer will supply it to your
computer. If you want to use more than one domain name server, it is useful to
enter the domains and addresses. Obtain this information from your network
administrator.
8 Click OK.
The Administrator dialog box closes and the MacTCP control panel reappears.
9 Click the control panel close box.
If you are setting up MacTCP for the first time, the control panel closes. If you
changed the configuration, and have used MacTCP with another configuration
and have not restarted the computer since then, you will see a dialog box
informing you that you will need to restart the computer to put your changes
into effect.
10 Restart the computer if necessary.
MacTCP is now ready for use or for distribution.
Getting users ready 41