Apple IP (AppleShare IP) Gateway - Manual (Page 52)

5 Click More.
The Administrator dialog box appears.
6 Click Manually in the upper-left section of the dialog box, and then click OK.
The MacTCP control panel reappears.
7 Type the assigned address for this client in the IP Address text box.
The address must be one of the addresses in the designated manual range.
8 Click More.
The Administrator dialog box reappears, with address and class information
now filled in.
9 If your network requires subnetwork addressing, set the subnet mask and subnet
address by dragging the Subnet Mask slider.
Obtain the correct settings from your network administrator.
10 Fill out the Domain Name Server Information section of the dialog box.
Obtain this information from your network administrator.
44 Chapter 2 / Installation and Setup