Apple QuickTake 200 Camera - Manual (Page 7)

Replacing the batteries
When the batteries are low, the battery warning flashes on the liquid-crystal
display (LCD) screen to remind you to replace the batteries. The camera turns
itself off when the batteries get too low to use.
IMPORTANT Do not use old and new batteries together or batteries of different
types together.
IMPORTANT Batteries contain chemicals, some of which may be harmful to
the environment. Please dispose of used batteries according to your local
environmental guidelines.
Installing the storage card
Before you can use your QuickTake 200 camera, you must install the storage
card that you received with the camera. After you install the card, you need to
format it using the Erase mode Format function. (You format the card the first
time that you use it in the camera.)
If the card is not in the camera, a NO CARD message flashes on
the LCD screen when you turn on the camera. You cannot take pictures
without a card.
WARNING The use of storage cards other than that specified for use with
your camera may result in damage to your camera.
Lithium
(Li)
7 Getting Started With the QuickTake 200 Camera