Apple QuickTake 200 Camera - Manual (Page 35)

Looking at images in the camera
You can view the images in your camera by connecting the camera to your
computer and viewing them on the computer screen.
IMPORTANT To conserve battery power, transfer images to your computer’s hard
disk before you view or work with them, or use the optional QuickTake 200
AC Adapter while the camera is connected to the computer. After the images
have been transferred, turn off the camera and open the images from your
computer’s hard disk using Camera Access.
1 Connect the camera to your computer.
For instructions, see “Connecting the Camera to Your Computer,” earlier in
this chapter.
2 Turn the mode dial to Computer (
`
).
3 Turn on the camera by sliding the power switch (
‰
).
4 Double-click the Camera Access icon in the QuickTake 200 folder to open it.
If Camera Access is already running when you turn on your camera, the
QuickTake 200 panel becomes active.
5 In the QuickTake 200 panel that appears, click Viewer.
The images appear in a Camera Contents window on your computer screen.
The Camera Contents window represents all the images in your camera that
have not yet been downloaded to your computer.
35 Using the Camera With Your Mac OS–Based Computer
Click to view
image information.