Apple QuickTake 200 Camera - Manual (Page 38)

Transferring images to your computer
Connect the camera to your computer to transfer images. For instructions, see
“Connecting the Camera to Your Computer,” earlier in this chapter.
IMPORTANT Apple recommends that you transfer all your images from the
camera to the computer before you work with them. This will result in better
performance and will conserve batteries.
1 Turn the mode dial to Computer (
`
).
2 Turn on the camera by sliding the power switch (
‰
).
When the camera is turned on and the serial connector is plugged in,
PC-MODE appears on the LCD screen.
3 On your computer, double-click the Camera Access icon.
The QuickTake 200 panel appears. If Camera Access is already running, the
panel becomes active after you attach your camera and turn the mode dial to
Computer mode (
`).
4 Click the Viewer button.
A Camera Contents window appears showing all the images in your camera.
5 From the Viewer menu, choose “Copy All Images to Disk.”
6 To transfer only selected images, select one or more images (using Shift-click) and then
choose “Copy Selected Images to Disk.”
7 In the dialog box that appears, create a new folder for your images.
8 In the Image File Name Prefix box, type a prefix name that will be assigned to this group
of images.
The images are saved on your hard drive in the folder you created, each
showing the prefix you assigned.
38 Chapter 3