Apple QuickTake 200 Camera - Manual (Page 21)

Self-Timer mode
You can take delayed photographs by turning to the Self-Timer (
~) mode on
the mode dial. This setting uses the Record-Fine mode.
1 Set the mode dial to Self-Timer (
~
).
2 Press the shutter release.
The LCD screen displays the countdown—from 10 to 1. The shutter opens
after 10 seconds and the camera captures the image. (
REC flashes in the
upper-left corner of the LCD screen while the image is being recorded.)
On the front of the camera, the red self-timer light stays on for 5 seconds and
then flashes for 5 seconds.
3 To stop the timer, turn the mode dial to another setting.
Play mode for the camera and the television
Use the Play (
2) mode to view the images in the camera on your LCD screen
or on a television screen.
To view one image on the LCD screen
1 Plug the optional AC power adapter into your camera to conserve the batteries.
See “Using the Camera With the Optional AC Power Adapter,” later in
this chapter.
2 Set the mode dial to Play (
2
).
The last image that you captured is played back.
3 Use the + and – buttons to scroll forward and backward one frame at a time through
your pictures.
4 Press the action button to show the Play mode, the frame number, and the date and the
time on the LCD screen.
Press the action button again to hide this information.
21 Using the Camera to Take Pictures