Apple QuickTake 200 Camera - Manual (Page 24)

See Chapter 3 for more information about using the Camera Access software
with your computer.
Erase mode
When the camera is in Erase (
#) mode, you can erase a single frame, erase all
the frames on the storage card, or format the card before you use it.
Remember, you cannot erase protected images.
IMPORTANT You cannot use Erase mode with write-protected cards.
1 Turn the mode dial to Erase (
#
).
The ERASE-MODE selections appear on the LCD screen.
2 Use the plus + and minus – buttons to select the function that you want.
m
FRAME: Erase one image.
m
ALL: Erase all images.
m
FORMAT: Format a storage card.
IMPORTANT See Chapter 1 for information about formatting a card.
3 Press the action button.
The function you selected appears in the upper-left corner of the LCD screen:
ERASE FRAME or ERASE ALL.
4 Press the action button again.
OK? flashes on your screen, giving you a chance to verify that you want to
erase the image.
5 Press the action button a third time to erase the image.
If you selected ERASE FRAME, the next image appears on the screen. You
can continue to erase frame-by-frame or skip a frame by moving forward or
backward using the + and - buttons.
6 Turn the mode dial to leave Erase mode.
24 Chapter 2