Apple QuickTake 200 Camera - Manual (Page 63)

m Never remove the card while the camera is recording.
m If condensation forms on the card, remove the card and wait an hour before
using it again.
m Do not bend, drop, or bang the card.
m Do not use or store the card in very hot, humid, or corrosive environments.
m Do not touch the card’s gold surfaces or allow the surfaces to become
soiled. Use a dry, lint-free cloth to wipe away any soil.
m Storage cards can be damaged by static electricity during transportation or
while in storage. Use the static-free case provided or keep the card in a
storage case, if available.
Solving problems
This section describes some of the problems that you might encounter and
offers solutions that you can try.
The camera LCD screen won’t go on when you slide the power switch (
‰
)
m The storage card is not loaded.
m The storage card is write-protected or is not formatted.
m The storage card is old and must be replaced.
m The batteries are not installed correctly. (See “Installing the Batteries”
in Chapter 1.)
m The batteries need to be replaced.
m You need to reconnect the optional AC power adapter to the camera or
make sure it is plugged in.
m The mode dial is not set to Record-Fine (!) or Record (1) mode to
take pictures.
m The mode dial is not set to one of the mode icons. Turn the dial until it
clicks into place.
WARNING When you format the storage card, all data is erased,
including protected images.
63 Maintenance and Troubleshooting