Apple QuickTake 200 Camera - Manual (Page 22)

Viewing nine images on the LCD screen
1 Plug the optional AC power adapter into your camera to conserve the batteries.
2 Set the mode dial to Play (
2
).
3 Press the + and – buttons at the same time.
Nine images appear on your LCD screen.
4 Press the + and – buttons to select and view the frames.
5 To revert to single-frame playback, press the + and the – buttons at the same time again.
A single image appears on your LCD screen.
Viewing images on a color television
IMPORTANT Your television must meet NTSC (National Television System
Committee) color television telecasting specifications (adopted mainly in the
United States, Canada, and Japan).
1 Make sure the camera and television are turned off.
2 Plug the optional power adapter into your camera to conserve the batteries.
See “Using the Camera With the Optional AC Power Adapter,” later in
this chapter.
3 Set the mode dial to Play (
2
).
4 Connect the video cable to the Video Out port on the camera.
5 Connect the other end of the video cable to the video input port on the television.
6 Turn on the camera.
Video Out port
Video cable
22 Chapter 2