JB Conversions 2800 LoMax 205 - Manual (Page 7)

LoMax™ 205 – Case and 3:1 Gear Set
JB Conversions, Inc. Page 6
337-625-2379
337-626-8365 fax
www.jbconversions.com
Reassembly:
1. Install new bearing races into the intermediate gear.
2. Lay the new LoMax case on the work bench with the front side facing up.
3. Place the new intermediate gear onto the tapered roller bearing.
4. Place the steel sleeve onto the top of the bearing. Place the original shims onto the top of the
sleeve. Add the additional shims onto the top of the original shims. This will intentionally yield
too much end play.
5. Place the 2
nd
tapered roller bearing into the top race in the intermediate gear. Slide the
intermediate gear/bearings into the case via the inspection opening.