JB Conversions 2800 LoMax 205 - Manual (Page 11)

LoMax™ 205 – Case and 3:1 Gear Set
JB Conversions, Inc. Page 10
337-625-2379
337-626-8365 fax
www.jbconversions.com
16. Using a punch, install the roll pins into the shift forks securing them to the rails. Visually check
the alignment of the fork and rail holes before driving in the roll pins. Tip: it may be easier to start
the roll pin into the fork before trying to install the fork in the case.
17. Install the front output shaft bearing into the case including the snap ring on the bearing. Install the
aluminum bearing retainer onto the bearing to hold it in place. Do not RTV on this retainer yet.