JB Conversions 2800 LoMax 205 - Manual (Page 14)

LoMax™ 205 – Case and 3:1 Gear Set
JB Conversions, Inc. Page 13
337-625-2379
337-626-8365 fax
www.jbconversions.com
23. Install the needle bearings onto the front output shaft using grease to hold them in place. Notice
there are two rows of bearings with a spacer in between the two rows. Wipe the bore of the new
LoMax gear with gear oil and slide it onto the front output shaft.
24. Install the small pin into the front output shaft.