JB Conversions 2800 LoMax 205 - Manual (Page 10)

LoMax™ 205 – Case and 3:1 Gear Set
JB Conversions, Inc. Page 9
337-625-2379
337-626-8365 fax
www.jbconversions.com
14. Install the input gear from the back of the case and secure it with the snap ring.
15. Start the short shift rail into the case from the front with the detent notches facing upward.
Position the fork in the case so that the rail can pass through it. Notice the fork is positioned with
the offset facing inward. Place the rail in the neutral position. NOTE: Minimal grinding is
required on the fork as shown in yellow in the photo on the right.