JB Conversions 2800 LoMax 205 - Manual (Page 22)

LoMax™ 205 – Case and 3:1 Gear Set
JB Conversions, Inc. Page 21
337-625-2379
337-626-8365 fax
www.jbconversions.com
48. Install hole plugs into the two side holes and 2 top holes. NOTE: Install the drain and fill plugs.
49. Apply RTV to the mounting surface of the inspection cover and install (15-25 ft-lbs).
50. Depending on transmission application, some of the bolt holes on the front of the LoMax case may
not be used. Several of the threaded holes on the front of the LoMax case are “thru” drilled.
Unused, thru-drilled holes should be plugged with the nylon inserts supplied in the kit. Use RTV
on the threads of each plug before installing them into the new case. Failure to complete this step
will result in fluid loss. See photo for example. Your application may vary.