Prepare to install kit – OR-Fab 86201 JEEP TJ SWING AWAY SPARE TIRE CARRIER - NON CANISTER User Manual
Page 2

Swing-Away Tire Carrier & Tire/Can Carrier
2
Kits 85095, -201, 86095, -201
Prepare to install kit
1. Remove spare tire.
2. Center stop lamp.
a. Remove screw and cover from open tailgate.
b. Disconnect center stop lamp wire connectors
from tailgate bracket.
c. Remove grommet and wire harness from tail-
gate.
d. Remove four bolts and center stop lamp from
spare tire bracket.
3. Spare tire bracket.
a. Remove four bolts and spare tire bracket from
tailgate.
4. Tailgate.
a. 2004 models: Open tailgate, un-clip and
remove two upper and lower plastic covers from
tailgate hinges.
NOTE
Note location of taped wire before disconnecting it.
Screw
Cover
Tailgate
Stop Lamp
Wire
Connectors
Tape
Tailgate Bracket
Grommet
Wiring
Harness
Tailgate
NOTE
When installing the tire carrier kit it is helpful to remove
the vehicle top.
Spare
Tire
Bracket
Bolt
Center
Stop Lamp
Bolt
Spare Tire
Bracket
Tailgate
Plastic
Covers
Clip