OR-Fab 84450 JEEP CHEROKEE XJ QUARTER ARMOR WITH RAIL - Manual (Page 3)

3 JEEP XJ Armor Kit
f. Repeat to opposite side at this time.
After Completing Installation
Engine Compartment
1. Connect both battery cables. Connect positive cable
first, then negative cable.
Miscellaneous
1. Check all fasteners to ensure they are tight.
2. Ensure all wires, hoses, cables, etc. are properly
connected and there is ample slack.
WARNING
Retorque all fasteners after 500 miles and after off road
use. All body lift components should be visually
inspected and fasteners retorqued during routine vehi-
cle servicing.
NOTE
All warranty information, instruction sheets, and other
documents regarding the installation of this product
must be retained by the vehicle owner. Information
contained in the instructions and on the warranty card
will be required for any warranty claims. The vehicle
owner needs to understand the modifications made to
the vehicle and how they affect vehicle handling and
performance. Failure to provide the customer with this
information can result in damage to the vehicle and
severe personal injury.
Bolts
Accessories
The following accessories are also available:
Kit# 84450: 4Dr. Rock Sliders
Kit# 83202: Rock Slider Front Bumper
Kit# 83203: Rock Slider Front Winch Bumper
Kit# 83209: Rock Slider Rear Bumper
Kit Parts List
Qty. Description
1 Quarter Panel Armor (Drivers side)
1 Quarter Panel Armor (Passenger side)
22 Bolt (5/16” x 1 1/4”)
22 Nut, Flange (5/16”)
22 Washer, Fender (3/8 USS”)