Pump gear, shaft and oil seal, Figure 6-8: pump gear, shaft and seal replacement, Servicing the rsd pump - continued – Hale RSD User Manual
Page 87
87
RSD Series Single-Stage PTO Pumps
p/n: 029-0020-92-0
Co rr ec tive M ain te n an ce
❑
Pump Gear, Shaft and Oil Seal
(See Figure 6-8: “Pump Gear, Shaft and Seal Replacement.”)
1.
To service the pump shaft assembly and oil seal you must remove the
gearbox assembly, then dismantle the pump head assembly from the
volute.
Figure 6-8: Pump Gear, Shaft and Seal Replacement
❑
If your RSD pump is engine mounted, by means of a flywheel housing
mount, see Section 6c: Available Options, heading “Engine Drive” on
page 100.
❑
For standard gearbox - see heading “Removal” on page 76
2.
Review heading “Before You Begin...” on page 67. Also review heading
“Cleaning and Inspection Guidelines” on page 70.
3.
Match mark the volute and pump head to ensure proper re-alignment
during reassembly.