Hale RSD - Manual (Page 116)

❑ Lube and Sealant Specs.
116 Appendix C1: Oil Specifications
Hale Series Pumps, Nov-2005, Rev-A
* For domestic use, Hale recommends using an SAE EP-90, 80W-90 Lubricant or
“Roadrunner” Full Synthetic SAE 50 Transmission Lubricant, manufactured by
the Eaten
® Corporation, or equivalent.
Grease
Use a Lithium-based grease with 1% to 3% Molybdenum Dissolved, i.e.,
❑ Do Corning BR2-PLUS ❑ Lubricate-Fist #3000
❑ Shell Super Duty Grease ❑ Imperial #777
❑ Mobile Grease Special ❑ Sunoco Moly #2EP
Note: For Hale SVS Torrent Stainless Valves see separate manual for additional
lubrication information.
Loctite Sealant
❑ #246 High Temperature Removable Threadlock (or equivalent) - for gear-
box assembly
❑ #246 Medium Strength Threadlock (or equivalent) - primarily for pump
assembly
Oil
Also see Section “Appendix C: Alternate Lubricant Manufacturers” on page
113.
Recommended Cleaners
❑ Safety Keen ❑ Stockyard Solvent
PSD / CSD / HFM 2.5 2.4 SAE 20 Non-Detergent Oil
SAE 30
PSD
(Vertical) 2.5 2.4 SAE 20 Non-Detergent Oil
SAE 30
RG 4 3.8 SAE EP 90
80W-90 (Lubricants must meet service rating API GL-5 requirements.)
Gearbox Model
Approximate Capacity
Recommended Oil
Quarts Liters
Table C1-1: Oil Capacity and Recommendation