Brother MFC 7050C - Manual (Page 87)

S E T U P A U T O D I A L N U M B E R S
8-3
Storing Number
s
Storing Speed Dial Numbers
You can store Speed Dial numbers, so when you dial you only
have to press three keys (and
Start ). There are 100 Speed Dial
locations. Even if you lose electrical power, numbers stored in
memory will not be lost.
1 Press Function , 1 , 5 , 2 .
SPEED-DIAL? #
2 Use the dial pad to enter a two-digit location (00–99) and
press
Set .
#05:
ENTER & SET
3 Enter the number (up to 20 digits) and press Set .
NAME:
4 Use the dial pad to enter the name (up to 15 characters) and
press
Set .
You can use the chart on page 5-3 to help you enter letters
—OR—Press
Set and go to Step 5 to store the number without
a name.
5 Use or to select the type of number and press Set .
FAX a fax only number
TEL a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
6 Return to Step 2 to store another Speed Dial number—OR—
Press
Stop to exit.
See
Speed Dialing
p. 9-2