Brother MFC 7050C - Manual (Page 76)

S E T U P S E N D
7-4
Real Time Transmission
When Memory is full, the MFC cannot continue scanning
documents into memory before sending. However, you can turn on
REALTIME TX. Then place the documents in the feeder and enter
the fax number. As soon as the phone line is free, the MFC starts
dialing and sending the fax.
1 Place the document in the feeder.
2 Press Function , 1 , 3 , 7 .
3 To change the default setting, press or to select ON (or
OFF) and press Set . Go to Step 5—OR—For the next fax
transmission only, press or to select NEXT FAX ONLY
and press Set .
REALTIME TX:OFF?
SELECT & SET
4 For the next fax only, press or to select ON (or OFF)
and press Set .
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
5 Press 1 if you want to select additional settings. The display
returns to the SETUP SEND menu—OR—Press 2 if you are
finished choosing settings and go to Step 6.
6 Enter the fax number and press Start .
Checking Job Status
You can check which jobs are in memory waiting to be sent. Press
Function , 1 , 4 to check it.