Brother HL 3070CW - Manual (Page 99)

Control Panel
89
3
Network for HL-3070CW users
Submenu 1 Submenu 2 Menu Selections Options Descriptions
Wired LAN TCP/IP Boot Method Auto */Static/RARP/BOOTP
/DHCP
Choose the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000) *
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000) *
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000) *
Enter the Gateway address.
IP Boot Tries ##### (3*)
APIPA On */Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 Off */On
Ethernet Auto */100B-FD/100B-HD/
10B-FD /10B-HD
Chooses Ethernet link mode.
Set to
Default
Restores wired network settings of the internal print server to the factory default.
Wired
Enable
On */Off Chooses Ethernet link mode.
WLAN TCP/IP Boot Method Auto */Static/RARP/BOOTP
/DHCP
Choose the IP method that best
suits your needs.
IP Address ###.###.###.###
(000.000.000.000) *
1
Enter the IP address.
Subnet Mask ###.###.###.###
(000.000.000.000) *
1
Enter the Subnet mask.
Gateway ###.###.###.###
(000.000.000.000) *
Enter the Gateway address.
IP Boot Tries # (3*)
APIPA On */Off Automatically allocates the IP
address from the link-local
address range.
1
IPv6 Off */On
SES/WPS/AO
SS
WPS w/PIN
Code
The factory settings are shown in Bold with an asterisk.